Entering Encryption Feature Activation Key
1. Navigate to Configure Library → Encryption.
2. Enter the 12-digit feature key in the spaces provided.
Note: Application Managed Encryption (AME) does not require a key.
3. Click Activate to save the feature key.
Entering Path Failover Feature Activation Key
Please contact your Dell technical sales representative about the availability of
this feature.
1. Navigate to Configure Library → Path Failover.
2. Enter the Control Path Failover 12-digit feature key in the spaces provided.
3. Click Activate to save the feature key. The following screen will display if you
have correctly entered the feature key.
a77ug061
Figure 1-22. The Configure Library: Date and Time screen
a77ug150
Figure 1-23. Configure Library: Encryption Activation screen
a77ug117
Figure 1-24. The Configure Library: Path Failover Feature Activation screen
a77ug118
Figure 1-25. Feature Key verification screen
Installation 1-19
To Next Page
Loading...
