Dell S4810 - Page 1486

Defaults 5 seconds
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.2.1.0
Introduced on the E-Series.
Related
Commands
radius-server host — configures a RADIUS host.
TACACS+ Commands
Dell Networking OS supports TACACS+ as an alternate method for login authentication.
tacacs-server group
Creates a group of TACACS servers to be used for Authentication, Authorization, and Accounting..
S4810
Syntax
aaa tacacsgroup group-name
To delete a group of TACACS servers, use the no tacacs-server group
group-name command.
Parameters
group-name Enter the name of the TACACS server group.
Defaults Not configured.
Command
Modes
CONFIGURATION
1486
Security