Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
119
2In the Diagnostic Tool drop-down list, select Bandwidth Test, TCP Connection Test, DNS Lookup,
Ping, Ping6, Tracerou te, Traceroute 6, SNMP Query, or Botnet Test.
Ta b l e 2 2 describes the diagnostic tools and functions.
3 If prompted for additional information like a Host or IP Address, type the requested information.
4Click Enter.
Table 22. Diagnostic tools and their functions
Diagnostic Tool Function
Bandwidth Test Measures the upload and download speed of the network connection
between your computer and the SMA/SRA appliance.
TCP Connection Test Tests the connectivity of a port that is specified by appending a colon
and port number to the host name or IP address (for example,
10.9.9.19:83 or www.myhost.com:83. If no port is specified, port 80 is
tested.
DNS Lookup Translates a DNS name to an IP address and vice versa.
Ping Tests the connection to a host or IP address.
Ping6
Tests the connection to an IPv6 address or domain. Ping6 is
meant for
use with IPv6 addresses and networks.
Traceroute Identifies the route and number of hops needed to connect to a host or IP
address.
Traceroute6 Identifies the route and number of hops needed to connect to an IPv6
address
or domain. Traceroute 6 is meant for use with IPv6
addresses and networks.
SNMP Query Looks up SNMP information from the selected MIB. SNMP must be enabled
(System > Administration page) before a query can be completed. In the
SNMP MIB drop-down list, select the MIB for which to display the values.
The SNWL-SSLVPN-MIB is the Secure Mobile Access specific MIB that
shows device statistics and licensing information. The SNWL-COMMON-
MIB is a file common to all Dell SonicWALL products and shows product
name, serial, firmware, ROM version, and asset number (user defined).
The rest of the MIBs are standard SNMP MIBs including SNMPv2-MIB and
All SNMP MIB-2, or you can select ALL MIBs.
Botnet Test Identifies whether an IP address is a Botnet IP address.
To Next Page
Loading...
