Choose b. Dial-up if you will use an optional
USB dial-up modem or ISDN.
NOTE: If you do not know which type of
connection to select, contact your ISP.
Follow the instructions on the screen and 5�
use the setup information provided by your
ISP to complete the setup.
Set up the TV Tuner (Optional)
(availability varies by regions)
You can set up the TV Tuner through the Media
Center.
To set up the TV Tuner for the first time:
Follow this procedure if you are launching the
Media Center for the first time.
Double-click on the Media Center icon on the
desktop.
Select • Express setup,
Go to – Main Menu → Tasks → Settings →
TV → Set up TV Signal → Confirm Your
Region and follow the instructions given.
Go to – Main Menu → TV + Movies → Set
up TV → Confirm Your Region and follow
the instructions given
Select • Custom setup,
Follow the instructions given. –
In the – Optional Setup screen, choose
Configure tuners, TV signal, and Guide.
Click – Next and confirm your region.
To re-setup the TV Tuner, if required:
Follow this procedure if you have already
launched Media Center once before.
Double-click on the Media Center icon on 1�
the desktop.
Go to 2� Main Menu → Tasks → Settings → TV
→ Set up TV Signal → Confirm Your Region.
To set up your connection to a wireless router:
Save and close any open files, and exit any 1�
open programs.
Click 2� Start → Connect To.
Follow the instructions on the screen to 3�
complete the setup.
Setting Up Your Internet Connection
To set up an Internet connection with a provided
ISP desktop shortcut:
Save and close any open files, and exit any 1�
open programs.
Double-click the ISP icon on the Microsoft2�
®
Windows
®
desktop.
Follow the instructions on the screen to 3�
complete the setup.
If you do not have an ISP icon on your desktop
or if you want to set up an Internet connection
with a different ISP, perform the steps in the
following section.
NOTE: If you cannot connect to the Internet
but have successfully connected in the
past, the ISP might have a service outage.
Contact your ISP to check the service
status, or try connecting again later.
NOTE: Have your ISP information ready. If
you do not have an ISP, the Connect to the
Internet wizard can help you get one.
Save and close any open files, and exit any 1�
open programs.
Click 2� Start → Control Panel.
Under 3� Network and Sharing Center, click
Connect to a Network.
The Connect to a Network window appears.
Click either 4� Connect to the Internet to
connect to the network using a wireless or
Broadband (PPPoE) or click Set up a dial-up
connection, depending on how you want to
connect:
Choose a. Broadband if you will use a DSL,
satellite modem, cable TV modem, or
wireless technology connection.
To Next Page
Loading...
