Dell Vostro 1520 - Processor and Memory Access Panel; Procedure for Removing the Access Panel

Back to Contents Page
Processor and Memory Access Panel
Dell™Vostro™1520ServiceManual
Removing the Processor and Memory Access Panel
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the battery from the computer.
3. Loosen the two captive screws on the access panel.
4. Lift the right side of the access panel.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.