1 M2.5 x 5-mm screws (2) 2 M2 x 3-mm screws (8)
3 display panel 4 top cover
Replacing the Display Panel
CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your
computer.
This procedure assumes that you have completed the removal procedure Removing the Display Panel
.
1. Replace the eight M2 x 3-mm screws in the display panel.
2. Position the display panel assembly in the top cover.
3. Align the guide pins at the top of the display hinge panels and position the display panel in the top cover.
4. Replace the two M2.5 x 5-mm screws in the hinges.
5. Replace the display bezel (see Replacing the Display Bezel
).
6. Replace the display assembly (see Replacing the Display Assembly
).
7. Replace the keyboard (see Replacing the Keyboard
).
8. Replace the hinge cover (see Replacing the Hinge Cover
).
9. Reconnect the antenna to the WLAN card (see Replacing a WLAN Card
).
Display Cable
Removing the Display Cable
CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your
computer.
1. Follow the instructions in Before Working on Your Computer
.
To Next Page
Loading...
