22 Speakers
Replacing the Speakers
Left Speaker
1
Align the screw holes on the left speaker with the screw holes on the
palm-rest assembly.
2
Replace the two screws that secure the left speaker to the
palm-rest assembly.
3
Route the mini-card cables through the routing guide on the left speaker.
4
Connect the left-speaker cable to the I/O board connector.
5
Connect the I/O cable to the I/O board connector and
system-board connector.
Right Speaker
1
Align the screw holes on the right speaker with the screw holes on the
palm-rest assembly.
2
Replace the two screws that secure the right speaker to the
palm-rest assembly.
3
Connect the right-speaker cable to the system-board connector.
Postrequisites
1
Replace the battery. See "Replacing the Battery" on page 18.
2
Replace the power-light board. See "Replacing the Power-Light Board" on
page 16.
3
Replace the base cover. See "Replacing the Base Cover" on page 14.
4
Follow the instructions in "After Working Inside Your Computer" on page 11.
OM_Book.book Page 22 Tuesday, September 25, 2012 2:30 PM
To Next Page
Loading...
