Dell XPS 13 - Removing the I;O Board; Prerequisites; Procedure

Removing the I/O board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Prerequisites
1 Remove the base cover.
2 Remove the battery.
Procedure
1 Remove the two screws (M1.6x3) that secure the I/O board to the palm-rest
assembly.
2 Peel o the tape that secures the display cable to the I/O board.
3 Disconnect the media-card reader cable from the I/O board.
4 Open the latch and disconnect the I/O-board cable from the I/O board.
50