Removing the antenna
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
NOTE: The antenna is included as part of the display assembly. However,
the antenna can be replaced separately.
Prerequisites
1 Remove the base cover.
2 Remove the battery.
3 Remove the display assembly.
4 Remove the display hinge cover.
Procedure
1 Remove the four screws (M2x4) that secure the antenna to the display
assembly.
65
To Next Page
Loading...
