Dell XPS 13 - Post-Requisites; Entering the Service Tag in the BIOS Setup Program

9 Adhere the tape over the display-cable bracket.
Post-requisites
1 Replace the heat sink.
2 Replace the solid-state drive.
3 Replace the wireless card.
4 Replace the battery.
5 Replace the base cover.
Entering the Service Tag in the BIOS setup
program
1 Turn on or restart your computer.
2 Press F2 when the Dell logo is displayed to enter the BIOS setup program.
3 Navigate to the Main tab and enter the Service Tag in the Service Tag Input
eld.
74