Replacing the power-adapter
port
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
1 Align the screw hole on the power-adapter port with the screw hole on the
palm-rest assembly.
2 Replace the screw (M2x3) that secures the power-adapter port to the palm-rest
assembly.
3 Route the power-adapter port cable through the routing guide on the palm-rest
assembly.
Post-requisites
1 Replace the system board.
2 Replace the wireless card.
3 Replace the battery.
4 Replace the base cover.
77
To Next Page
Loading...
