Identifier GUID-FA3B2FD2-52E7-43FD-8566-AA808CE90E66
Status Released
Removing the battery (half-
length)
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-ADE0B0E5-2130-4FC4-8553-96D2D5460E56
Status Released
Prerequisites
Remove the base cover.
Identifier GUID-FCDEA56B-004E-44A7-A6A0-7C50399AF6E1
Status Released
Procedure
1 Remove the four screws (M2x4) that secure the battery to the palm-rest
assembly.
2 Disconnect the battery cable from the system board.
19