Identifier GUID-E50A81D7-E412-49DE-BEB1-6B6374245972
Status Released
Replacing the battery (half-
length)
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-B0DA0B2B-67A5-4E8B-9FA0-7C2DEB75C5DE
Status Released
Procedure
1 Align the screw holes on the battery with the screw holes on the palm-rest
assembly.
2 Replace the four screws (M2x4) that secure the battery to the palm-rest
assembly.
3 Connect the battery cable to the system board.
Identifier GUID-A5E4D6EB-7F3C-40E5-A565-D1CF58021412
Status Released
Post-requisites
Replace the base cover.
21
To Next Page
Loading...
