Identifier GUID-40DC76F7-B3EC-450A-848E-632D68C352E2
Status Released
Replacing the speakers
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-AC4AADA4-AE75-4834-B2D7-49DA6C0A92EC
Status Released
Procedure
1 Using the alignment posts, place the speakers on the palm-rest assembly.
2 Replace the four screws (M2x2) that secure the speakers to the palm-rest
assembly.
3 Route the speaker cables through the routing guides on the palm-rest assembly.
4 Connect the speaker cable to the system board.
Identifier GUID-D6D9C7FD-F5F2-4841-BED9-C4F8672A8F1D
Status Released
Post-requisites
1 Replace the battery (half-length) or the battery (full-length).
2 Replace the base cover.
43
To Next Page
Loading...
