Identifier GUID-14B28E08-E8D1-4B67-83F3-85BFE7AA7937
Status Released
Replacing the audio daughter-
board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-C9A47377-4CCF-4494-8D1D-338EF8D7B50C
Status Released
Procedure
1 Turn the audio daughter-board over and place the audio daughter-board into the
slot on the system board.
2 Replace the screw (M2x3) that secures the audio daughter-board to the system
board.
Identifier GUID-918C0499-50D7-49AB-8F43-B72724B368FF
Status Released
Post-requisites
1 Replace the system board.
2 Replace the memory modules.
3 Replace the heat-sink assembly.
4 Replace the fans.
5 Replace the solid-state drive (half-length) or the solid-state drive (full-length).
6 Follow the procedure from step 3 to step 6 in “Replacing the hard drive”.
70
To Next Page
Loading...
