Dell XPS 15 - Removing the Display Assembly; Prerequisites; Procedure

Identifier GUID-AB1F153B-621B-42FC-89BE-0E1105FF1786
Status Released
Removing the display assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-B56E2301-3ABA-48D9-BC76-A2962E57BC12
Status Released
Prerequisites
1 Remove the base cover.
2 Remove the battery (half-length) or the battery (full-length).
3 Remove the wireless card.
Identifier GUID-074C95E5-EC9E-47A6-9E61-EECF4480ECF1
Status Released
Procedure
NOTE: The touch-screen cable is available only on laptop congurations
with touch displays.
1 Remove the screw (M2x2) that secures the display-cable bracket to the system
board.
2 Disconnect the touch-screen cable and display cable from the system board.
80