Dell XPS 15 - Replacing the Power-Adapter Port; Procedure; Post-Requisites

Identifier GUID-A99140DB-7AF3-4218-B305-532FF94DF51D
Status Released
Replacing the power-adapter
port
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-6573CEC9-6601-4D86-B746-449414FF1856
Status Released
Procedure
1 Place the power-adapter port into the slot on the palm-rest assembly.
2 Route the power-adapter port cable through its routing guides on the palm-rest
assembly.
3 Replace the screw (M2x3) that secures the power-adapter port to the palm-rest
assembly.
4 Connect the power-adapter port cable to the system board.
Identifier GUID-F0710676-729E-43A4-BC18-2F7005354246
Status Released
Post-requisites
1 Replace the display assembly.
2 Replace the battery (half-length) or the battery (full-length).
3 Replace the base cover.
88