Steps
1. Align the screw holes on the left fan (FAN2) with the screw holes on the system board and palm-rest and keyboard
assembly.
2. Replace the two (M2x4) screws and the single (M1.6x4) screw to secure the left fan (FAN2) to the system board and
palm-rest and keyboard assembly.
3. Connect the left fan cable to the system board.
Next steps
1. Install the base cover.
2. Follow the procedure in After working inside your computer.
Removing the right fan
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
About this task
The following image indicates the location of the right fan and provides a visual representation of the removal procedure.
Removing and installing components
25
To Next Page
Loading...
