Dell XPS 8300 - Replacing the Card Retention Bracket

38 PCI Express Cards
Replacing the Card Retention Bracket
1 Follow the instructions in "Before You Begin" on page 13.
2 Replace the card retention bracket, ensuring that:
• The guide clamp is aligned with the guide notch.
• The top of all cards and filler brackets are flush with the alignment bar.
• The notch on top of the card or filler bracket fits around the
alignment guide.
3 Replace the screw that secures the card retention bracket.
4 Replace the computer cover (see "Replacing the Computer Cover" on
page 18).
1 screw 2 card retention bracket
1
2
book.book Page 38 Wednesday, April 25, 2012 12:34 PM