62 Hard Drive(s)
Replacing the Primary Hard-Drive
1
Slide the primary hard-drive into the hard drive cage.
2
Align the screw holes on the primary hard-drive with the screw holes on the
chassis.
3
Replace the screws that secure the primary hard-drive to the chassis.
4
Connect the power and data cables to the primary hard-drive.
Postrequisites
1
Replace the computer cover. See "Replacing the Computer Cover" on
page 25.
2
Follow the steps in "After Working Inside Your Computer" on page 15.
1power cable 2data cable
3 screws (4) 4 primary hard-drive
4
3
1
2
book.book Page 62 Wednesday, April 4, 2012 2:00 PM
To Next Page
Loading...
