Hard Drive(s) 63
Hard Drive Cage
Prerequisites
1
Remove the computer cover. See "Removing the Computer Cover" on
page 23.
2
Remove the primary hard-drive. See "Removing the Primary Hard-Drive"
on page 61.
Removing the Hard Drive Cage
1
If applicable, disconnect the power and data cables from the secondary
hard-drive.
2
Remove the screws that secure the hard drive cage to the chassis.
3
Slide the hard drive cage towards the back of the chassis.
book.book Page 63 Wednesday, April 4, 2012 2:00 PM
To Next Page
Loading...
