Replacing the computer cover
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
1 Ensure that no tools or extra parts are left inside the computer.
2 Align the tabs at the bottom of the computer cover with the slots located along
the edge of the chassis.
3 Press the computer cover down and slide it towards the front of the computer.
4 Replace the thumbscrew that secures the computer cover to the chassis.
5 Place the computer in an upright position.
Post-requisites
Follow the instructions in “After working inside your computer”.
19
To Next Page
Loading...
