Dell XPS 8900 - Replacing the Wireless Card; Procedure; Post-Requisites

Replacing the wireless card
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
CAUTION: To avoid damaging the wireless mini-card, do not place any
cables under it.
1 Connect the antenna cables to the wireless mini-card.
The following table provides the antenna-cable color scheme for the wireless
mini-card supported by your computer.
Connectors on the wireless card Antenna-cable color
Main (white triangle) White
Auxiliary (black triangle) Black
2 Slide the wireless-mini card bracket into the wireless card.
3 Align the notch on the wireless mini-card with the tab on the wireless mini-card
connector.
4 Press the other end of the wireless mini-card down and replace the screw that
secures the wireless mini-card to the system board.
Post-requisites
Replace the computer cover.
38