Removing the hard-drive cage
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Prerequisites
1 Remove the computer cover.
2 Remove the primary-hard drive.
Procedure
1 If applicable, disconnect the power and data cables from the secondary hard-
drive.
2 Remove the screws that secure the hard-drive cage to the chassis.
50
To Next Page
Loading...
