Replacing the hard-drive cage
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
1 Align the tabs on the hard-drive cage with the slots on the chassis and slide the
hard drive in place.
2 Replace the screws that secure the hard-drive cage to the chassis.
3 If applicable, connect the power and data cables to the secondary hard-drive.
Post-requisites
1 Replace the primary hard-drive.
2 Replace the computer cover.
52
To Next Page
Loading...
