Dell XPS 8900 - Removing the Optical Drive; Procedure; Post-Requisites

Removing the optical drive
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
1 Slide the optical drive into the optical-drive bay through the front of the
computer.
2 Align the screw holes on the optical drive with the screw holes on the chassis.
3 Replace the screws that secure the optical drive to the chassis.
4 Connect the power and data cables to the optical drive.
NOTE: Repeat step 1 to step 4 to replace the secondary optical-drive, if
applicable.
Post-requisites
1 Replace the front bezel.
2 Replace the computer cover.
63