Dell XPS 8900 - Replacing the Top I;O-Panel; Procedure; Post-Requisites

Replacing the top I/O-panel
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
1 Align the screw holes on the top I/O-panel with the screw holes on the top
panel.
2 Replace the screws that secure the top I/O-panel to the top panel.
3 Route the I/O-panel cables through the routing guides on the chassis.
4 Connect the top I/O-panel cables to the system board. For more information,
see "System-board components".
Post-requisites
1 Replace the top cover.
2 Replace the front bezel.
3 Replace the computer cover.
76