Replacing the front USB-panel
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
1 Slide the front USB-panel cable into the slot on the chassis.
2 Slide the front USB-panel tabs into the front USB-panel slot.
3 Replace the screw that secures the front USB-panel to the front panel.
4 Connect the front USB-panel cables to the system board.
For more information, see "System-board components".
Post-requisites
1 Replace the front bezel.
2 Replace the computer cover.
79