Dell XPS 8900 - Replacing the Power-Button Module; Procedure; Post-Requisites

Replacing the power-button
module
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
1 Push the power-button module tabs into the slots on the front panel until the
module snaps in place.
2 Route the power-button module cable through the routing guides on the
chassis.
3 Connect the power-button module cable to the system board.
For more information, see “System-board components”.
Post-requisites
1 Replace the top cover.
2 Replace the front bezel.
3 Replace the computer cover.
83