GUID-1C25F362-25CF-40CD-8A9B-2B98FB94F5FC
Removing the solid-state drive
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
CAUTION: Solid-state drives are fragile. Exercise care when handling the
solid-state drive.
CAUTION: To avoid data loss, do not remove the solid-state drive while the
computer is in sleep or on state.
GUID-8B2299D1-0783-4006-AE74-48B3B0B4C820
Prerequisites
1 Remove the right-side cover.
2 Remove the full-length graphics card (if installed).
GUID-5BDA453A-8318-4B25-B57B-F3C29469AFA0
Procedure
1 Remove the screw that secures the solid-state drive to the system board.
48
To Next Page
Loading...
