Appendix 185
Suspend Mode
(
S3
default)
Specifies the power management suspend mode.
•
S1
— The computer resumes more quickly from sleep mode.
•
S3
— The computer conserves more power when not in use
(system memory remains active).
Quick Resume This feature enables/disables the Intel
®
Viiv™ Quick Resume
Technology.
The default setting is Off.
Maintenance
Service Tag Displays the system service tag.
SERR Message
(
On
default)
Controls the SERR message mechanism. Some graphics cards
require that the SERR Message mechanism be disabled.
•
Off
—
Do not use the SERR message mechanism
.
•
On
—
Use the SERR message mechanism.
Load Defaults This setting restores the computer’s factory-installed default
settings.
•
Cancel
— Do not restore factory-installed default settings.
•
Continue
— Restore factory-installed default settings.
Event Log Displays the system event log.
•
Mark all entrie
s — Mark all event log entries as read (R).
•
Clear log
— Clear all event log entries.
NOTE: Once an event log entry is marked as read (R) that entry
cannot be marked as unread (U).
POST Behavior
Fastboot
(
On
default)
Enables or disables the option to speed up the boot process by
skipping certain configurations and tests.
•
Off
— Do not skip any steps in the boot process.
•
On
— Boot quickly.
Numlock Key
(
On
default)
Enables or disables the numerical and mathematical features
of the rightmost bank of keys on the keyboard.
•
Off
— Right keypad keys function as arrows.
•
On
— Right keypad keys function as numbers.
book.book Page 185 Tuesday, November 27, 2007 10:29 AM
To Next Page
Loading...
