Optical Drive 33
Replacing the Optical Drive
1
Follow the instructions in "Before You Begin" on page 9.
2
Align the screw holes on the optical-drive bracket with the screw holes on
the optical drive.
3
Replace the two screws that secure the optical-drive bracket to the optical
drive.
4
Snap the optical-drive bezel onto the optical drive.
5
Slide the optical drive into the optical-drive bay until it is fully seated.
6
Replace the screw that secures the optical drive to the base cover.
7
Replace the memory module(s) (see "Replacing the Memory Module(s)"
on page 17).
8
Replace the battery (see "Replacing the Battery" on page 14).
1 optical-drive bezel 2 optical drive
3 optical-drive bracket 4 screws (2)