50 Coin-Cell Battery
Replacing the Coin-Cell Battery
1
Follow the instructions in "Before You Begin" on page 9.
2
Connect the coin-cell battery cable to the system-board connector.
3
With the adhesive side of the coin-cell battery facing down, press the
coin-cell battery on the slot on the top cover.
4
Replace the palm-rest assembly (see "Replacing the Palm-Rest Assembly"
on page 38).
5
Follow the instructions from step 5 to step 6 in "Replacing the Optical
Drive" on page 33.
6
Replace the hard drive (see "Replacing the Hard Drive" on page 28).
1 coin-cell battery 2 coin-cell battery cable
To Next Page
Loading...
