70 Top Cover
11
Remove the power-button board (see "Removing the Power-Button Board"
on page 45).
12
Remove the coin-cell battery (see "Removing the Coin-Cell Battery" on
page 49).
13
Remove the four screws that secure the top-cover assembly to the base
cover.
14
Turn the computer over.
15
Make note of the speakers cable routing.
16
Remove the nine screws that secure the top-cover assembly to the base
cover.
17
Using your fingertips, gently ease the top-cover assembly from the base
cover.
18
Lift the top cover assembly off the base cover.