90 Daughter Board
11
Turn the top-cover assembly over.
12
Remove the processor fan and heat-sink assembly (see "Removing the
Processor Fan and Heat-Sink Assembly" on page 79).
13
Lift the connector latch and disconnect the daughter-board cable from the
connector on the daughter board.
14
Remove the screw that secures the daughter board to the top cover.
15
Carefully ease the connectors on the daughter board out of the slots in the
top cover, and lift the daughter board out of the top cover.
1 daughter-board cable 2 daughter board
3 screw
To Next Page
Loading...
