106 Speakers
5
Lift the speakers along with its cable off the top cover.
Replacing the Speakers
1
Follow the instructions in "Before You Begin" on page 9.
2
Route the speakers cable through the routing guides.
3
Align the screw holes on the speakers with the screw holes on the top cover.
4
Replace the four screws (two on each speaker) that secure the speakers to
the top cover.
5
Replace the system board (see "Replacing the System Board" on page 101).
1 speaker cable routing 2 speakers (2)
3 screws (4)
To Next Page
Loading...
