TV Antenna Connector 117
18
Carefully ease the TV antenna connector off the slot in the top cover and
lift it off the top cover.
Replacing the TV Antenna Connector
1
Follow the instructions in "Before You Begin" on page 9.
2
Align the TV antenna connector with the slot on the top cover and place
the TV antenna connector on the top cover.
3
Replace the two screws that secure the TV antenna connector to the top
cover.
4
Route the TV antenna connector cable through the routing guides.
5
Replace the I/O board (see "Replacing the I/O Board" on page 113).
6
Connect the speaker cable to the connector on the I/O board.
1 TV antenna connector 2 TV antenna connector cable
3 top cover
To Next Page
Loading...
