Palm Rest : Dell XPS M1330 Service Manual
file:///C|/Users/SIIES/Downloads/Dell XPS 1330/palmrest.htm#wp1038494[16/07/2010 06:28:53 p.m.]
1. Align the palm rest with the computer base and gently snap it into place.
2. Connect the touch pad connector to the system board.
3. Replace the seven screws on the top of the palm rest.
4. Turn the computer upside down and replace the six screws in the computer base.
5. Replace the display assembly (see Replacing the Display Assembly
).
6. Replace the internal card with Bluetooth® wireless technology (see Replacing the Bluetooth Card
).
7. Replace the keyboard (see Replacing the Keyboard
).
8. Replace the hinge covers and center control cover (see Replacing the Hinge Covers and Center Control Cover
).
Back to Contents Page
To Next Page
Loading...
