Video Card/Thermal-Cooling Assembly: Dell XPS M1710 Service Manual
file:///C|/Users/santhosh_v.ASIA-PACIFIC/Desktop/Hawke/New%20folder/video.htm[2/21/2014 11:23:34 AM]
1 captive screws (4) 2 video card/thermal-cooling assembly 3 system board connector
Replacing the Video Card/Thermal-Cooling Assembly
NOTE: Ensure that the video card/thermal-cooling assembly mylar flap rests on top of the processor thermal-cooling
assembly when the video card/thermal-cooling assembly is in place.
1. Carefully align the video card/thermal-cooling assembly over the connector on the system board and press down.
NOTE: The video card/thermal-cooling assembly is labeled "PUSH HERE."
2. Tighten the four captive screws, labeled "1" through "4," in consecutive order.
Back to Contents Page
To Next Page
Loading...
