EasyManua.ls Logo

Dell XPS M1710 - Replacing the System Board

Dell XPS M1710
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
System Board: Dell XPS M1710 Service Manual
file:///C|/Users/santhosh_v.ASIA-PACIFIC/Desktop/Hawke/New%20folder/sysboard.htm[2/21/2014 11:23:45 AM]
1 system board M2.5 x 5-mm screws (4)
23. Remove the system board, slowly easing the connectors out of their access holes on the back and side of the computer
base:
a. With the back of the computer facing you, grasp the upper-right corner of the system board and lift it slightly.
b. Pull the system board assembly away from you toward the front of the computer and slightly to the right; at the
same time, use your left hand to release the audio connectors by pulling the side of the computer base slightly
to the left.
1 system board assembly
Replacing the System Board
1. Replace in reverse order all of the components that you removed in Removing the System Board.
NOTICE: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the
computer. Failure to do so may result in damage to the computer.

Related product manuals