Hard Drive 17
4
Carefully remove the SATA cables from the hard drive or drives that are
installed in the cage.
Replacing a Hard Drive in the Hard Drive Cage
1
Remove two screws on each side of the hard drive cage to free the hard
drive, then lift the drive out of its tray in the cage.
NOTICE: When a hard drive is not in the computer, store it in protective antistatic
packaging. See “Protecting Against Electrostatic Discharge” in the Product
Information Guide.
2
Remove the new hard drive from its packaging.
Save the original packaging for storing or shipping the hard drive.
1 captive screws (4)
1 screws 2 hard drive cage
To Next Page
Loading...
