Keyboard 27
7
Keyboard
For more information about the keyboard, see "Using the Keyboard and
Touchpad" in your Owner’s Manual.
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the
Product Information Guide
.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on the back of the computer).
NOTICE: To help prevent damage to the system board, you must remove the battery
from the battery bay before you begin working inside the computer.
Removing the Keyboard
1
Follow the procedures in "Before You Begin" on page 9.
2
Remove the hinge cover (see "Hinge Cover" on page 25).
NOTICE: The keycaps on the keyboard are fragile, easily dislodged, and time-
consuming to replace. Be careful when removing and handling the keyboard.
3
Remove the keyboard:
a
Remove the four screws at the top of the keyboard.
b
Ground yourself by touching one of the metal connectors on the back
of the computer.
NOTICE: If you leave the area, ground yourself again when you return to the
computer.
To Next Page
Loading...
