34 Communication Cards
c
Slide the card at a 45-degree angle out of its connector.
NOTE: Do not insert a Mobile Broadband (WWAN) network card into the WLAN
card connector.
NOTE: The Mini-Card may have two or three connectors, depending on the type of
card you ordered.
NOTICE: The connectors are keyed to ensure correct insertion. If you feel
resistance, check the connectors and realign the card.
NOTICE: To avoid damaging the Mini PCI card, never place cables on top of or
under the card.
5
Install the card:
a
Move any cables out of the way to make space for the Mini-Card.
b
Align the card with the connector at a 45-degree angle, and press the
card into the connector until it clicks.
NOTE: For more specific information about which cable to connect to which
connector, see the documentation that came with your Mini-Card.
1 metal securing tab
To Next Page
Loading...
