Display Assembly 41
Replacing the Display Bezel
1
Realign the display bezel over the display panel, and gently snap into place.
2
Replace the two screws securing the display bezel to the display assembly.
3
Replace the two rubber screw-covers/display bumpers around the screws.
Removing the Display Panel
1
Remove the display assembly (see "Removing the Display Assembly" on
page 37).
2
Remove the display bezel (see "Removing the Display Bezel" on page 40).
3
Remove the display cable from the routing channel.
4
Remove the camera cable connector.
5
Remove the twelve screws that secure the display panel brackets to the
display panel.
To Next Page
Loading...
