Dell XPS M1730 - Replacing the Palm Rest

52 Palm Rest
Replacing the Palm Rest
1 Align the palm rest with the computer base and gently snap it into place.
2 Connect the touch pad connector to the system board.
3 Replace the nine screws on the top of the palm rest.
4 Turn the computer upside down and replace the fourteen screws in the
computer base.
5 Replace the display assembly (see "Replacing the Display Assembly" on
page 39).
6 Replace the Mini Cards and memory modules.(see "Memory" on page 19
and "Communication Cards" on page 31).
7 Replace the keyboard (see "Replacing the Keyboard" on page 28).
8 Replace the hinge cover (see "Replacing the Hinge Cover" on page 26).