Optical Drive 57
15
Optical Drive
CAUTION: Before performing the following procedures, follow the safety
instructions in the
Product Information Guide
.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching a connector on the back panel of the
computer.
1
Follow the procedures in "Before You Begin" on page 9.
2
Save and close any open files, exit any open programs, and shut down the
computer.
3
Remove the optical-drive locking screw.
4
Insert a scribe into the notch and push it to the side to release the drive
from the bay.
To Next Page
Loading...
