Video Card and System Board 75
21
Video Card and System Board
Removing the Video Card
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the
Product Information Guide
.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as the
back panel) on the computer.
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the
Product Information Guide
.
NOTICE: Handle components and cards by their edges, and avoid touching pins
and contacts.
1
Follow the instructions in "Before You Begin" on page 9.
2
Remove any installed ExpressCards from the ExpressCard slot.
3
Remove any installed memory modules or Mini Cards (see "Memory" on
page 19 and "Communication Cards" on page 31).
4
Remove the hard drive (see "Hard Drive" on page 15).
5
Remove the internal card with Bluetooth
®
wireless technology (see
"Internal Card With Bluetooth
®
Wireless Technology" on page 13).
6
Remove the palm rest (see "Palm Rest" on page 49).
7
Remove the display graphics cable from its connector.
8
Carefully lift up the video card assembly by pulling on the connector on
the system board.
To Next Page
Loading...
