130 Adding and Replacing Parts
NOTE: If the memory module is not installed properly, the computer may not boot
properly. No error message indicates this failure.
5
Ground yourself and install the new memory module:
a
Align the notch in the module edge connector with the tab in the
connector slot.
b
Slide the module firmly into the slot at a 45-degree angle, and rotate
the module down until it clicks into place. If you do not feel the click,
remove the module and reinstall it.
1 memory module 2 securing clips
(2 per connector)
3 memory module
connector
1
2
3
To Next Page
Loading...
