Adding and Replacing Parts 131
6
Replace the memory module cover.
NOTICE: If the cover is difficult to close, remove the module and reinstall it. Forcing
the cover to close may damage your computer.
7
Insert the battery into the battery bay, or connect the AC adapter to your
computer and an electrical outlet.
8
Turn on the computer.
As the computer boots, it detects the additional memory and automatically
updates the system configuration information. If prompted, press <F1> to
continue.
To confirm the amount of memory installed in the computer, click the Start
button, click Help and Support, and then click Computer Information.
Mini-Card
If you ordered a Mini-Card with your computer, the card is already installed.
CAUTION:
Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on the back of the computer).
To Next Page
Loading...
