Adding and Replacing Parts 135
NOTICE: The connectors are keyed to ensure correct insertion. If you feel
resistance, check the connectors and realign the card.
5
Install the replacement Mini-Card:
a
Align the Mini-Card with the connector at a 45-degree angle, and
press the Mini-Card down into the securing clips until the card clicks
into place.
NOTICE: To avoid damaging the Mini-Card, never place cables under the card.
b
Connect the antenna cables to the antenna connectors on the Mini-
Card by matching the color of the cable to the color of the triangle
above the connector. Connect the main antenna cable (white) to the
antenna connector with the white triangle. Connect the auxiliary
antenna cable (black) to the antenna connector with the black
triangle.
1 securing clips 2 antenna connectors (2) 3 Mini-Card connector
2
3
1
To Next Page
Loading...
